Technical parameters:
| Items | Technical Parameters | Image | |
| Name | 200KHz ultrasonic transducer |  | |
| Model | PHAL-200-01B | ||
| Active zone diameter | 10 mm | ||
| Frequency | 200KHz±5% | ||
| Detection Distance | 0.10~1.5m | ||
| Minimum Parallel lmpedance | 1200Ω±20% | ||
| Capacitance | 380pF±20% @1KHz | ||
| Sensitivity | Emitting voltage 800Vpp,distance:30cm,receiving and emitting ,Receiving voltage:20 mV | ||
| Operating Voltage | Peak Voltage<1000VPP | ||
| Operating Temperature | -40~+80ºC | ||
| Pressure | 16Kilos or 1.6MPa | ||
| Angle | (Beamwidth) Half-power Beam Width@-3dB:10°±2 Sharp Angle:23°±4 | ||
| Housing Material | titanium alloy | ||
| usage | Ultrasonic Gas Flow Meter | ||
| dimension | customizable | ||
| Protection Level | IP68 | ||
| Weight | 14g±5% | ||
| Wiring Instructions | integrated type:Red+,White-,Black: shielded wire; | ||
| Admittance Curve | Product Structure Diagram | ||
 |  | ||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor