Metal capacitive intelligent differential pressure sensor/transmitter with English menu and buttons

I Product IntroductionThe differential pressure transmitter is applied to prevent medium in pipes from entering into transmitter directly, and relies on capillary to link with pressure diaphragm. It is suitable to measure the liquid level, density and pressure of liquid, gas or vapor. And it converts pressure signal into 4~20mA

Featured Products

I Product Introduction

The differential pressure transmitter is applied to prevent medium in pipes from entering into transmitter directly, and relies on capillary to link with pressure diaphragm. It is suitable to measure the liquid level, density and pressure of liquid, gas or vapor. And it converts pressure signal into 4~20mA DC digital signal. It can communicate, set up and monitor mutually with manipulator by HART protocol.

Suitable applied situations:
In petrochemical production process, differential pressure transmitter is always combined with throttling device to measure liquid, vapor and gas flow, or to detect liquid level, liquid interface and differential pressure and other parameters.

II Performance Specifications

Zero shift volume
Maximum positive migration volume:
difference between migration volume upper range and measuring range
Maximum negative migration volume: measuring range lower limiting value

Measuring range
Lower range limit: -100%URL~+100%URL-Span
Upper range limit: -100%URL+Span~+100%URL

Measuring range and zero adjustment
HART manipulator, local button,communication software supported by HART protocol.

Response time
When the electrical damping of the transmitter turns off, the response time of the step input applied to the transmitter from 10% to 90% of the output range is less than or equal to 0.4s.

Technical Data-ASP2001B Smart High Accuracy Pressure Transmitter
Measure Medium:Liquid, Gas, Vapour
Measure Range:0-0.15~2000KPa
Accuracy:0.1%F.S
Ambient Temperature:-40 ºC~85 ºC
Range Ratio:100:1
Insulation Resistance:>100M Ω(100VDC)
Damping Value:0.1~16 s(Optional)
Temperature Affecting ValueSuperior to 0.1%F.S/10 ºC
EMC:EN 61326 -1:2013 
Output:4~20mA(Max 22mA, Min 3.8mA)
Communication:Hart
Intrinsic Safety:Ex ia IIC T6

Metal Capacitor Smart Differential Pressure Transducer/Transmitter with English Menu & Key Buttons
Metal Capacitor Smart Differential Pressure Transducer/Transmitter with English Menu & Key Buttons

III Structural Drawing

Metal Capacitor Smart Differential Pressure Transducer/Transmitter with English Menu & Key Buttons
Metal Capacitor Smart Differential Pressure Transducer/Transmitter with English Menu & Key Buttons

IV Selection Guide

 
 Selection List 
Code 1
1
Product category
Differential Pressure Transmitter
Code 2
B
C
Accuracy
0.1%F.S
0.25%F.S
Code 3
H
M
W
Output
(4~20) mA & HART
(4~20) mA & ModBus
Wireless
Code 4
2
3
4
5
6
7
Measuring range
(0 ─ 0.6 ~ 1.5)kPa
(0 ─ 1.0 ~ 7.5)kPa
(0 ─ 0.4 ~ 40)kPa
(0 ─ 1.86 ~ 186)kPa
(0 ─ 6.9 ~ 690)kPa
(0 ─ 0.02 ~ 2)MPa
Code 5
N
B
U
L
R
Connecting screw
NPT1/4 Female, no relief valve
NPT1/4 Female, relief valve on Flange's back
NPT1/4 Female, relief valve on Flange's upper side
NPT1/4 Female, relief valve on Flange's lower side
Remote seal
Code 6
2
3
Isolating diaphragm
316L stainless steel
Hastelloy C
Code 7
N
F
P
O-ring material process flange
Perbunan (NBR)
Viton(FKM)
Telfon
Code 8
0
1
2
Installation bracket
No bracket
Carbon bracket
Stainless steel bracket
Code 9
C
E
Instructions & Nameplate language
In Chinese
In English
Code 10
C
E
Nameplate
In Chinese
In English
Code
M
d
i
K
P
E
F
Optional
LCD digital indicator
Flameproof Ex d II C T4~T6
Intrinsical safe Ex ia IIC T4~T6
Oil Probhibition
Stainless steel tag lable
NPT1/2 Female waist-type flange
M20*1.5 T-joint---Ø14 Pressure pipe
Order example:
Smart Differential Pressure Transmitter ASP2001B-4H02B7H31B00CiM4
[4]: Measuring range: 0-4.0 ~ 40 kPa
[H0]: Output: 4mA-20mADC/HART, linear
[2]: Isolating diaphragm: 316L stainless steel
Filled liquid: silicon oil
[B]: Location of release port (with plug): Rear face of process flange or no
[7]: Material of O ring: Perbunan (NBR)
[H]: Connecting screw: NPT1/4 female thread
[3]: Static pressure: 25
Mounting hole thread: M12
[1]: Electrical connecting screw: M20×1.5 cable gland and plug
Electronic housing: Aluminum with epoxy resin coat
[B00]: No bracket
[C]: In Chinese
[i]: Intrinsical safe Ex ia II C T4~T6
[M4]: LCD digital indicator


FAQ:
1. Q: Are you manufacturer or trading company?
A: We are A professional manufacturer of Pressure/Temperature sensor, wireless transmitters, gateways, even the total solutions of IIOT for more than 11 years in China. With 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with 4~20mA, 0.5~4.5V, UARTand etc, also wireless IOT measurement transmitters. We provide high quality products with high competitive factory price.
 
2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have strict quality control system, and each product is done fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
 
3. Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.
 
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.
 
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
 
6. Q: What is lead time of your product?
A: We are factory, our lead time is always within 10~15 working days for products without customization, but lead time will vary based on different products. You can check detail lead time with our sales.

7. Q: What international certificates do you have for your products?
A: we have gained CE, RoHs certificates, and are in the process of gaining ATEX & UL certificates now.





 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours