Titanium alloy ultrasonic transducer for ultrasonic gas flow meter ranging

Titanium Alloy Ultrasonic Transducer Distance Measurement For Ultrasonic Gas Flow MeterTechnical parameters: ItemsTechnical ParametersImageName200KHz ultrasonic transducerModelPHAL-200-01DActive zone diameter10 mmFrequency200KHz±5%Detection Distance0.10~1.5mMinimumParallel lmpedance1200Ω±20%Capacita

Featured Products

Titanium Alloy Ultrasonic Transducer Distance Measurement For Ultrasonic Gas Flow Meter



Technical parameters:
 
ItemsTechnical ParametersImage
Name200KHz ultrasonic transducer
Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flow Meter
ModelPHAL-200-01D
Active zone diameter10 mm
Frequency200KHz±5%
Detection Distance0.10~1.5m
Minimum
Parallel lmpedance
1200Ω±20%

Capacitance
380pF±20% @1KHz
SensitivityEmitting voltage:800Vpp,distance :30cm,receiving and emitting,Receiving signal:20 mV
Operating
Voltage
Peak Voltage<1000VPP
Operating Temperature-40~+80ºC

Angle
16Kilos or 1.6MPa
Pressure(Beamwidth) Half-power Beam Width@-3dB:10°±2
Sharp Angle:23°±4

Housing Material
It can be used in strong acid and alkali environment(TI)
UsageUltrasonic Gas Flow Meter
Installation
Dimension
customizable
Protection LevelIP68
Weight14g±5%
Wiring Instructionsintegrated type:Red+,White-,Black: shielded wire
Admittance CurveProduct Structure Diagram

Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flow Meter
   Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flow Meter

 


Block diagram of ultrasonic distance transducer :

Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flow Meter

Schematic Diagram of Temperature Sensor (model: MF58_502F3470):

Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flow Meter

Integrated type Cable instruction:   
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +      
White: transducer -         
Black: shielding


Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flow Meter

2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)

Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flow Meter
Red and black are temperature sensor wiring



 Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB

Three-core wiring instructions:                
                        
    Red: Transducer +
     Blue: temperature sensor +
     Black: Public-

Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flow Meter

 Four-core wiring instructions:

Red: Transducer +                      
Yellow: Transducer-
Blue, black: temperature sensor


Titanium Alloy Ultrasonic Transducer Distance Measurement for Ultrasonic Gas Flow Meter




 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours