Ultrasonic Distance Sensor/Ultrasonic Level Sensor/Ultrasonic Level Sensor

Ultrasonic Distance Transducer / Ultrasonic Level Transducer / Ultrasonic Level SensorsOutline  Dimensions (UNIT: mm)Connecting Method Characteristic: Part numberQU-06Sensing range sd100 ~ 2000 mmResolution 1 mmAdjustment YesSonic frequency175 KHzResponse time 30 msVoltage supply range +Vs 10~30 VDC

Featured Products

Ultrasonic Distance Transducer / Ultrasonic Level Transducer / Ultrasonic Level Sensors

Outline  Dimensions (UNIT: mm)
Ultrasonic Distance Transducer / Ultrasonic Level Transducer / Ultrasonic Level Sensors
Connecting Method 
Ultrasonic Distance Transducer / Ultrasonic Level Transducer / Ultrasonic Level Sensors

Characteristic:


 
Part numberQU-06
Sensing range sd100 ~ 2000 mm
Resolution 1 mm
Adjustment Yes
Sonic frequency175 KHz
Response time 30 ms
Voltage supply range +Vs 10~30 VDC
Current consumption max. 35 mA
Output signal 0~10V
Adjustment Yes
LED  yellowsolid yellow: object in the evaluation range
yellow  flashing: program function, object detected
LED  red solid red: Error
red  flashing: program function, object not detected
Type Cylindrical
Housing material nickel-plated /ABS
Width / diameter 30 mm
Height / length 90 mm
Connection types Connector M12
Operating temperature -25~ +70 °C
Storage temperature-40~+80°C
Protection class IP 67

Programmed Analogue Output Function:
Ultrasonic Distance Transducer / Ultrasonic Level Transducer / Ultrasonic Level Sensors

A1:                unusable area
A2:                nominal sensing range
Mode of operation:  rising ramp
 
Adjusting The Evaluation Limits 
The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply voltage -U or +U to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1s. LEDs indicate whether the sensor has recognized the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught with -U, A2 with +U.
 
TEACH-IN rising ramp (A2 > A1)
- Position object at lower evaluation limit
- TEACH-IN lower limit A1 with - U
- Position object at upper evaluation limit
- TEACH-IN upper limit A2 with + U
 
TEACH-IN falling ramp (A1 > A2):
- Position object at lower evaluation limit
- TEACH-IN lower limit A2 with + U
- Position object at upper evaluation limit
- TEACH-IN upper limit A1 with - U
 
LED Displays 
Displays in dependence on operating modeRed LEDYellow LED
Teach-In evaluation limit  
Object detectedOffFlash
No object detectedFlashOff
Object uncertain (Teach-In invalid)OnOff
Normal mode (evaluation range)OffOn
FaultOnPrevious state
Ultrasonic Distance Transducer / Ultrasonic Level Transducer / Ultrasonic Level Sensors

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours