RS485 communication interface, Standard MODBUS-RTU Protocol output;
Short protection and reverse polarity protection;
Full stainless steel construction, compact size, light weight
Good output consistency and replaceability.
Available for calibration and parameter change on site through matched soft of upper computer.
2.Exia IIBT6 Ga;
2.Intrisic safe version;
3.Water-proof connection box;
4.Lightening-proof protection box
-100kPa…0kPa~10kPa…100MPa (Pressure); 0m~3.5m…200mH2O (Level)
Over pressure: 1.5 times FS / 110MPa (min. value is valid)
Pressure type: Gauge / Absolute/Sealed gauge
Power Supply: 9V~28V DC
Output signal: RS485 Interface(MODBUS-RTU protocol)
Thermal drift: ±0.04%FS/ºC(≤100kPa);
Measurement Error: ±2ºC(For"temperature & pressure type" only)
Storage Temp.: - 40~120ºC
Insulation: 100V, 100M
Shock: 20g, 25Hz~2000Hz
Impact: 100g, 11ms
Protection: IP65(B1,B2); IP63(B3); IP68(Level)
Weight: Pressure transmitter ~160g;
Level transmitter ~250g;
Housing: stainless steel 1Cr18Ni9Ti
Diaphragm: stainless steel 316L
O- Ring: Viton
Intelligent Level Transmitter
Measure Range 0m~3.5m…200m H2O
X=actual range, L= cable length, suggested L-X=(1~2)m
RS485 Communication Interface, MODBUS protocol
M20×1.5 male, end face seal
M20×1.5 male, waterline seal
MS200 water-proof connection box
PD140 lightening-proof protection
MPM4780W [0~10]mH2O 12 R8 22 Yc The Whole Spec.
Certificates We Have
1. Q: Are you manufacturer or trading company?
A: We are 48-year professional manufacturer of Pressure/ Level/ Temperature/Flow transmitters with 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with SDI, I2C, 4~20mA, 0.5~4.5V and etc, and wireless IOT measurement transmitters. We provide high quality products with high competitive factory price.
2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have strict quality control system, and each product is done fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
3. Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
6. Q: What is lead time of your product?
A: We are factory, our lead time is always within 10~15 working days for products without customization, but lead time will vary based on different products. You can check detail lead time with our sales.
7. Q: What international certificates do you have for your products?
A: we have CE, RoHS, UL, ATEX as well as ship-use DNV etc.