1. RS485 communication interface, Standard MODBUS-RTU Protocol output;
2. Netting available;
3. Short protection and reverse polarity protection;
4. Full stainless steel construction, compact size, light weight
5. Good output consistency and replaceability.
6. Available for calibration and parameter change on site through matched soft of upper computer.
2. Exia IIBT6 Ga;
Range: -100kPa…0kPa~10kPa…100MPa (Pressure); 0m~3.5m…200mH2O (Level)
Over pressure: 1.5 times FS / 110MPa (min. value is valid)
Pressure type: Gauge / Absolute/Sealed gauge
Power Supply: 9V~28V DC
Output signal: RS485 Interface(MODBUS-RTU protocol)
Thermal drift: ±0.04%FS/ºC(≤100kPa);
Measurement Error: ±2ºC(For"temperature & pressure type" only)
Storage Temp.: - 40~120ºC
Insulation: 100V, 100M
Shock: 20g, 25Hz~2000Hz
Impact: 100g, 11ms
Protection: IP65(B1,B2); IP63(B3); IP68(Level)
Weight: Pressure transmitter ~160g;
Level transmitter ~250g;
Housing: stainless steel 1Cr18Ni9Ti
Diaphragm: stainless steel 316L
O- Ring: Viton
Intelligent Pressure Transmitter
Measure range: -100kPa…0kpa~10kPa…100MPa
[0~X]kPa or MPa
X=actual measure range
RS485 interface, MODBUS communication protocol
4-pin Hirschmann plug connection
Cable connection, default cable length:1.5m
7-pin plug connection
M20×1.5 male, face type seal
M20×1.5 male, waterline seal
MS200 water-proof connection box
PD140 lightening-proof protection device
MPM4780 [0~100]kPa R8 22 B1Yd The Whole Spec.
Certificates We Have
1. Q: Are you manufacturer or trading company?
A: We are 48-year professional manufacturer of Pressure/ Level/ Temperature/Flow transmitters with 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with SDI, I2C, 4~20mA, 0.5~4.5V and etc, and wireless IOT measurement transmitters. We provide high quality products with high competitive factory price.
2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have strict quality control system, and each product is done fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
3. Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
6. Q: What is lead time of your product?
A: We are factory, our lead time is always within 10~15 working days for products without customization, but lead time will vary based on different products. You can check detail lead time with our sales.
7. Q: What international certificates do you have for your products?
A: we have CE, RoHS, UL, ATEX as well as ship-use DNV etc.