Mobile Signal Booster with LCD CDMA800 WCDMA2100MHz Audio Amplifier/Mobile Signal Receiver/Mobile Signal Receiver

Mobile Signal Booster With LCD CDMA800 WCDMA2100mhz Audio Amplifier/Mobile Signal Receiver/Cell Phone Singal ReceiverApplication:To expand signal coverage of fill signal blind area where the signal is weak or unavailable.Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.Frequency RangeUplinkDownli

Featured Products

Mobile Signal Booster With LCD CDMA800 WCDMA2100mhz Audio Amplifier/Mobile Signal Receiver/Cell Phone Singal Receiver


Application:
To expand signal coverage of fill signal blind area where the signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
Frequency RangeUplinkDownlink
GSM900+DCS1800890- 915/1710 - 1785MHz935- 960/1805- 1880MHz
GSM850+PCS1900824 - 849/1850- 1910MHz869- 894/1930- 1990MHz
GSM900+WCDMA2100890- 915/1920 - 1980MHz935- 960/2110- 2170MHz
CDMA800+WCDMA2100824 - 849/1920 - 1980MHz869- 894/2110- 2170MHz
LTE800+LTE2600832- 862/2500 - 2570MHz791- 821/2620 - 2690MHz
GSM850+AWS1700824 - 849/1710 - 1755MHz869- 894/2110 - 2155MHz
Max. Gain60-70dB65-75dB
Max. Output Power10-20dBm10-24dBm
BandwidthWide Band
Manual Gain Control31dB     / 1dB Step
Automatic Gain Control>20dB
Ripple in-band≤ 6dB
Return loss≤ -10dB
Noise Figure≤ 6dB
Spurious Emission
&Intermodulation
9KHz~1GHz≤ -36dBm
1~12.75GHz≤ -30dBm
WCDMASpurious Emission MaskMeet 3GPP TS 25.143 ( V 6.2.0 )
Modulation Accuracy≤ 12.5%
Peak Code Domain Error≤ -35dB@Spreading Factor 256
Time Delay≤ 1.5 μs
Frequency stability≤ 0.01ppm
MTBF> 50000 hours
Power SupplyAC100-240V,DC9V/5A
Power LEDPower indicator
Impedance50 ohm
Alarm LEDRedAutoexcitation or High Power
GreenStandard
Mechanical Specification
RF ConnectorN-Female
SwitchPower Switch\Manual Gain Control Switch
CoolingHeatsink Convection cooling
Humidity< 90%
Operating Temperature-10°C~55°C
Environment ConditionsIP40
Installation TypeWall Installation
Size268mm*58mm*189mm
Weight< 3Kg

Indoor Dual Band Signal Repeater (Signal Booster) series is an ideal solution for both two wireless systems in small/medium businesses and home users looking to enhance indoor 2G&3G wireless connectivity. It is connected via coaxial cable to Dual Band Donor Antenna and Service Antenna, Dual Band Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over-saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is an easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.
The dual-band improves mobile signals with no negative impact on human health.

Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS

Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi, 806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi, 806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)

Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LED panel, This smart function is easier than DIP Switch, can set up parameters, It is a simple, safe, and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the donor source signal fluctuates.


Features:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extension of the signal of the base station. Optimization of the quality of the signal and source
3. Cover about 500~2500m² Without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wideband signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etc
Mobile Signal Booster with LCD CDMA800 WCDMA2100MHz Audio Amplifier/Mobile Signal Receiver/Cell Phone signal Receiver
Mobile Signal Booster with LCD CDMA800 WCDMA2100MHz Audio Amplifier/Mobile Signal Receiver/Cell Phone signal Receiver
 Mobile Signal Booster with LCD CDMA800 WCDMA2100MHz Audio Amplifier/Mobile Signal Receiver/Cell Phone signal ReceiverMobile Signal Booster with LCD CDMA800 WCDMA2100MHz Audio Amplifier/Mobile Signal Receiver/Cell Phone signal Receiver
Mobile Signal Booster with LCD CDMA800 WCDMA2100MHz Audio Amplifier/Mobile Signal Receiver/Cell Phone signal Receiver
Mobile Signal Booster with LCD CDMA800 WCDMA2100MHz Audio Amplifier/Mobile Signal Receiver/Cell Phone signal ReceiverMobile Signal Booster with LCD CDMA800 WCDMA2100MHz Audio Amplifier/Mobile Signal Receiver/Cell Phone signal Receiver

Q1. Could I get a sample before bulk order?

Yes, we offer the sample for all models but charged.

Q2. What should I do if I don't know about frequency in my country?

Please feel free to contact us with your inquiry, we will find the frequency you need and address your problems. 

Q3. Do you accept OEM/ODM order?

Yes, we can customize the brand logo, colors, and frequencies.

Q4.Shipment Date

Sample3-5 business days
<20 pcs7-15 days
20-50 pcs15-24 days
>50 pcsNegotiate

Q5: Delivery Date of the sample by DHL/FedEx
USA/Canada/Europe/Asia3-5 days
Middle East/Latin American5-7 days
African3-7 days

Q6.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
but we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please contact us with more details.

Q7.Others
(1)Frequency
We can customize Single/Double/Triple/Quand/Penta Band for cellphone signal like 2G/3G/4G(GSM/CDMA/DCS/PCS/WCDMA/LTE, etc,)
(2)Output Power &Coverage Areas

Output PowerCoverage Areas
20dBm500-1500m²
23dBm1500-2500m²
25dBm2500-4000m²
27dBm3000-5000m²
30dBm5000-8000m²

*Coverage is related to local signal strength, please contact us with your local condition, we can offer the best solution.
(3)Antenna
Cellphone signal booster must attach one indoor antenna and one outdoor antenna by two coaxial cables.
Website's price only includes a signal booster, please contact us if you need one set of devices with antenna, splitter, and coupler.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours