Brief description:
This apparatus provides isolated power supply to the field two-wire, three-wire transmitter, and detects the current signal in a circuit meanwhile. It transmits the input current or voltage signal to isolated current or voltage signal in a circuit or two isolated circuits, and the input, output, and power supply are galvanically isolated from each other.
It can be used together with modular instrumentation and DCS, PLC and other systems,to offer signal isolation, signal conversion, signal distribution, signal processing and other functions to field instrument, thereby enhancing the immunity of automatic control system in the industrial production process, and ensuring system stability and reliability. This product has many varieties, such as 1 in/1 out, 1 in/2 out, 1 in/4 out,2 in/2 out, with input/output magnetic isolation.
Compared with other similar products, this apparatus has the advantages of fast response time, low power loss and quite well temperature characteristics.
Mainly technical parameters:
Product name | loop signal isolator converter 420ma to 010v converter | |
Key words | signal isolator converter | |
Channels | 1 in 1 out, 1 in 2 out, 1 in 3 out, 1 in 4 out, 2 in 2 out, etc | |
Transmitting accuracy | ±0.1%F.S(25ºC±2ºC) | |
Rise time | ≤0.2 ms | |
Settling time | ≤2 ms | |
Influence of ambient temperature | <30 ppm/ºC | |
Ripple | <1 mV | |
Frequency range | 0~300 Hz | |
Output load capacity: | ||
DC current: | ||
0~10mA | ≤700Ω | |
4~20mA | ≤350Ω | |
0~±10mA | ≤1kΩ | |
0~±20mA | ≤500Ω | |
DC voltage: | ||
0(1)~5V | ≥1MΩ | |
0~10V | ≥2MΩ | |
0~±5V | ≥1MΩ | |
0~±10V | ≥2MΩ | |
Please specify your requirements before order if greater output load capacity is needed. | ||
Power supply voltage range: | ||
18~32V DC (Recommended voltage:24V DC) | ||
85~265V AC(OR 120~360V DC) | ||
Power consumption | Single output | Double output |
24V DC | 0.4W | 0.6W |
220V AC | 1.0VA | 1.2VA |
Insulation resistance | ≥ 100 MΩ (Input /Output /Power) | |
Dielectric strength | ≥ 1500 V AC (Input /Output /Power, 1mA leakage current, 1 minute test time) | |
Electromagnetic compatibility | IEC 61000-4 | |
Panel light indication: | ||
Light indicating | PWR (green) remains shining during normal operation; | |
Light indicating | ALM light glitters (red) at occurrences of input signal fault, and remains shining at occurrence of input excess. |